Protect Your Pride And Joy With The Ghost Immobiliser

Secure your prized possessions from theft by using the Ghost Immobiliser. It's discreet and does not require any additional key fobs.

The device uses existing buttons on your vehicle (steering wheel doors, door panels, and the centre console) to create a unique pin code sequence that can be up to 20 presses. This will then allow the startup of your vehicle.

Simple process to change the PIN code

Many homeowners are upgrading their security because of the rise in vehicle theft. There are many kinds of aftermarket security devices including tracking systems, alarms and immobilisers. They're not all equally effective at protecting your vehicle. A tracking system can help you locate your vehicle if it's stolen however it cannot prevent the crime. Immobilisers, however are exactly what they state on the label - they disable your car's motor to prevent it from being started. The Autowatch Ghost is one of the most advanced options available, making it virtually impossible for thieves steal your vehicle.

Using the existing buttons in your car The ghost device generates an exclusive sequence that has to be entered prior to the engine can start. This can be accomplished using the indicator stalk, window or heater buttons. Additionally it is possible to use a mobile app which can act as an emergency PIN code bypass and allow the driver to operate the car without having to use the button sequence. This is an excellent option when you wish to donate your car to valet parking or for servicing. The immobiliser will stay active.

The Ghost is an unique and innovative device that operates with the buttons of your vehicle instead of as a standalone device. This means that it is not just a powerful security measure against theft from your vehicle but also a transferable device over to any future cars you may own, making it more investment-wise than traditional steering wheel locks.

Small, weatherproof device

The Autowatch Ghost Immobiliser is an advanced security device that shields your car from key cloning and Marquita hacking. It also stops ECU swapping. It's a weatherproof and small device that connects directly to your vehicle's ECU over the CAN data bus to disable the engine. It can be installed in the vehicle without the need for extra wiring, and has been thoroughly tested to make sure it is compatible with all vehicles. It is also resistant against jamming devices which are a typical technique used by thieves to bypass immobilisers.

The benefit of CAN data over conventional systems is that they operate in a silent manner. It is not able to be detected by sophisticated RF scanning and code-grabbing technologies as well as recognized by conventional diagnostic tools. The Autowatch ghost does not produce LEDs, but instead utilizes the buttons inside your vehicle, such as the steering wheel, centre console or door panels to create a unique, changeable disarm sequence. You can make this sequence as long as 20 presses to provide additional security. The iPhone app allows a single, authorised connection using a pairing code that is unique to the Ghost and communication between the two is secured.

The Ghost stops car thieves from adding an ignition key replacement or replacing the ECU in order to bypass the immobiliser. The engine will only start if a valid PIN code is entered. It is able to be operated temporarily in the Valet/Service mode (with the appropriate parameters, like a 30mph speed limit) and, therefore, you can give your car to a valet or service without entering an entry code.

Each vehicle is tested

The Autowatch Ghost is a world-first aftermarket immobiliser CANbus. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device detects electronic signals to disable your car's system from going through its normal startup routine until you input an individual passcode. The system can be activated or deactivated by using your smartphone app without the need for extra wires.

Standard factory immobilisers for vehicles work by having an electronic transponder in the key that sends a signal to the ECU. The car will start if the correct code is sent. If, however, the transponder from another vehicle is used instead, the immobiliser won't recognize it. This enables the vehicle to be started and stolen. A South African company that is at the forefront of vehicle safety systems technology developed the Ghost immobiliser. It shields you from key cloning or hacking, and even key theft. The only way thieves could steal your car is by physically towing it away and even then, they would not be allowed to drive it.

Ghost uses buttons on your vehicle, including the indicator stalk, the steering wheel, and door panels, to generate unique PIN codes which must be entered to use your car. This is not required to use extra hardware such as keys-fobs, and can be as long as 20 presses long. It is also unrecognizable to diagnostic equipment and does not transmit radio frequency signals, so thieves are not able to utilize sophisticated RF scanning or code grabbing techniques to discover that security systems have been installed.

Contrary to physical anti-theft devices such as wheel locks or clamps, Ghost is hidden within the vehicle to ensure that it can't be removed or disabled by thieves and is also harder to remove than a car alarm, which requires disarming with an action sequence. This makes it a great complement to a GPS tracking device, which can be used to locate your vehicle after it's been stolen.

Override of emergency PIN code

You don't need to look too far on social media to see stories or even videos of vehicles that have been stolen by car thieves using the latest technology tools available to them. Key-cloning devices, for instance, and https://www.boris.icu/ (This Webpage) hacking tools that allow thieves to start the vehicle with your original keys.

The Ghost immobiliser helps combat this and provides you with an additional layer of security to prevent your vehicle from being taken when it is targeted by thieves. It creates a unique pin code sequence that is triggered by the buttons you have on the steering wheel, door panel, and the centre console. This unique PIN is entered alongside the original key fob to prevent the engine from starting. The unique override pin can be located on a black card that you will receive after the installation. It is easy to remember since there are no LED indicators.

The device is hidden in the wiring of your vehicle and does not emit radio signals. This means it can't be detected by diagnostic software which can identify the type of security system you have installed. This makes it a great alternative to an electronic device for tracking.

Contrary to most security systems that use a relay inside the engine bay these CANBUS Immobilisers communicate with the car's ECU and BCM via the CAN data bus (brand dependant). This enables them to shut down the vehicle completely by sending the use of a digital block of commands that is sent to both the ECU and the engine.

It is also possible to connect an analogue immobiliser, alarm or tracker to these systems, but this has to be stated prior to the installation of the device. They are also compatible with valet/service modes and is a great alternative to a tracking device if you take your car into the dealer for an electrical issue.

Service/Valet Mode

In recent years, there has been a rise in the number of vehicles stolen without the owner's keys. It is more easy than ever to steal your pride and joy thanks to the availability of key cloning tools & door lock picks. We have created the Autowatch Ghost Immobiliser to combat this. It stops your car from being driven, Download free even if you keys have been copied.

It connects directly to your car's ECU (Engine Control Unit), via the data loop called CAN. It is completely silent because it does not utilize radio frequencies or key fobs. It isn't detected by diagnostics or any other hacking device. It also prevents the user from using a new ECU or key to circumvent the system, since only the PIN code allows the engine to start.

The device is hidden within your vehicle and is accessible via buttons on your steering wheel, the centre console and Https://Www.Boris.Icu/ (Www.Auto-Software.Org) door panels. A unique & changeable PIN code sequence that can be as long as 20 digits has to be entered before you can start your vehicle.

This is the first aftermarket immobiliser CAN bus that has been designed to stop your car being moved away or even started in the event that a PIN code hasn't been entered before. If you are driving away with the device in motion the indicator will flash on your dashboard that will flash continuously for about 300m. Entering your PIN code will disable the anti-hijack. Your car will continue to function just as normal. If you don't enter your PIN at this time the indicator will continue to flash and require a new PIN every time you try to start your car.