Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home, and could even be fatal. It is important to make sure that your windows are in good condition.

Single-pane windows are fairly simple to replace and will usually fit into the old frames very easily. If you have double glazed window repairs near me-paned windows which are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the glass to ensure that any shards fall onto the fabric instead of onto the floor where they can be trodden under and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional comes out and fix the window. It also acts as a barrier that will prevent any intruders from getting access to your home. If the gap between the door and the window is substantial, you may prefer a security screen that also has a window. This will give you the best of both.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window repair near me. As time passes, they may be affected by a variety of issues that include sagging. A sagging window in uPVC can cause problems with light, draughts and even security. It's crucial to act as soon as you realize that your uPVC windows are falling down.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to unblock the windows to get at the frame. Then, you can remove the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after you have relocated your hinges. If you're satisfied with the fit, you can tighten the screws until they remain in the right place.

If you aren't able to move the hinges you may require replacing the seal. Rubber seals can dry out and lose their elasticity with time, leading them to lose their tightness. If this happens, it's crucial to replace the seal as fast as possible so that your uPVC windows remain watertight and draught-proof.

uPVC handles may also loosen up. Often this is due to screws that have become loose over time. However, it can occur because the handle mechanism has been worn out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. The first step is to close the window and then perform an experiment to ensure that it fits. The corners of the sash need to align with the casing joint. If it isn't then you can use a screwdriver to loosen the handle and turn the mechanism back into position.

3. Water Leaks

It is crucial to take action if you get up each morning to find mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is an easy fix that can be completed by anyone who is a DIYer with the skills. Depending on how serious the issue is, old caulking may need to be removed. It is crucial to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk and then make the area more difficult to clean and reduce the efficiency of your energy.

It is important to check that the drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more severe situations, you may have to replace the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double glazed window Repairs near me-glazed glass it is more likely the issue is more with the seal than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open in a breeze it could be hinges that are at fault. They can be replaced by any competent DIYer and can usually be completed in just a few minutes.

Like any mechanical component, hinges can wear out over time. Changing a window hinge is essentially a very simple process but it can be easier when you have a person to help you hold the frame up.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. You can do this by looking for the arrows on each hinge, this indicates which way the window should open.

Window hinges that aren't working properly could be the result of incorrectly opening the window a certain way or by inadequate installation at the factory. This can often be resolved by sending us a photo on our website. We will be happy to give you suggestions.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window repairs near me operate and close more easily. It can also reduce the possibility of a window sticking and prevent corrosion. It is recommended to do this at least once a year. WD40 or other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different factors. The hinges can also become unbalanced due to wear, causing an opening between the frame and sash. They can be repaired by giving them a good cleaning, but in the event that they are beyond repair it may be necessary to get them aligned or replaced. Secondly the interlock, this is located on the hinge of the window and can also become misaligned, again it's possible to just give them a thorough clean, however in some instances it could be necessary to have them replaced.

These seals can wear down or become damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping can help prevent draughts. Another option is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures, and also lessen draughts.

Another, and most effective methods to reduce the draughts in your home is to use a draught excluder, these are typically made of fabric filled with some type of filler. They can be positioned on top of your windowsill. They will help stop cold air from entering and keep your home warm and cosy!

The windows made of upvc can continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually wear out and it is cheaper to replace them than to repair them. If you are experiencing problems with your upvc windows, it is always recommended to seek assistance from a professional as soon as you can.