Double Glazing Lock Repairs

Having quality locks on your windows and doors helps to prevent burglars from getting into your home. They generally don't like breaking glass or squeezing through windows that are not closed.

However, some double glaze window repair glazing owners have had problems with their door or window lock after it's been installed. Fortunately, these issues are often fixable without having to purchase new double glazing.

Broken or damaged locks

If your uPVC window or door lock is damaged or defective and requires a locksmith, they can repair it for you. They can repair the striker plates, hinges and locks on your double glazing. They can also reposition the cylinder to fix any misalignment issues which could cause your handle to not work properly.

The mechanism could be seized if the key fits in the lock, but it will not turn or is difficult for you to insert. Grease or dirt can be trapped in the mechanism. If this is the case, then it may be possible to clean the lock and then lubricate it. Use a dry lubricant such as graphite or teflon and not oil, as oil can attract dirt and cause it to stick to the inside of the mechanism. After the lubrication, insert the key into the lock and turn it. The lubricant needs to be absorbed into the mechanism and the lock should turn smoothly.

Loose screws within the lock mechanism are a different cause of a faulty lock. They can loosen and fall out or break completely and stop the lock from functioning properly. A screwdriver is a tool to tighten these screws but care must be taken not to over-tighten them because this could cause damage to internal components.

A damaged lock can be dangerous for you and your family. This is especially relevant if you have young children. It's possible for them to unlock the door without knowing and thus give them access to your home. If you're worried about the possibility that this could occur, a professional locksmith can assist you re-secure the double glazing doors.

Misty Glaze is a professional uPVC company in Lancing that can repair to double glazed windows all types faulty and damaged mechanisms on uPVC windows and doors. We can also alter the locking mechanism on your uPVC windows or double Glazed repairs near me glazing to meet your needs. This means that replacement windows and doors are not always required.

Handles that are broken or damaged

Many double-glazed windows have a multi-point lock as part of the overall security package. This is an excellent option for those who are concerned about potential thieves who may try to gain entry to your home. It is also a good idea to ask your installer about anti-lift blocks which can be put in on top of the existing locks and ensure that your window is secured in its closed position.

Handle locks are often damaged or fail. They are the first component that a criminal will use to force open your window. Fortunately, the good news is that this is one of the most straightforward parts to repair.

Modern uPVC and aluminium handles operate a multi-point locking system called Espagnolette that is designed to withstand forced entry. This security upgrade is often available as an extra on new uPVC window installations. Older style uPVC and aluminium handles can be upgraded to lock systems that shoot bolts and again as an additional extra on new double glazed windows repair glazed window installations.

It is essential to fix the handle as soon as possible if it is damaged. Handles that are damaged can prevent the window from closing correctly and allow drafts in. It may also be a weakness that burglars with a plethora of opportunities could exploit, putting your belongings and family at risk of theft.

To fix the malfunctioning mechanism, first access the window frame and then remove the damaged handle. The gearbox is then opened to identify the type of gearbox used to open the handle. This will permit to replace the handle that matches the profile and the internal window frame mechanisms.

After the mechanism has been repaired, the handle may be put back together using the original screws. However, we recommend replacing them with more long screws as they will provide an even more secure fit. The final step is to seal the handle using an opaque sealant. This will shield it from further deterioration. Once that's done your window will be operational again, and at a fraction of the cost of replacing the entire window.

Hinges that are Broken or Faulty

If your windows do not close properly, you may experience draughts, the weakening of your home's security barrier, and an increased risk of water or damp damage. Window hinges that fail or fail to function properly are a common issue and can be fixed easily.

If your uPVC windows don't close or open and close, it's likely the hinges require to be repaired or replaced. While many window companies require you to purchase a whole new window to resolve this simple issue, we're able to replace the faulty hinges and save you money.

Window hinges can be damaged by repeated use or weakening over time due to corrosion. In the event of a broken hinge, it's crucial to take measures to prevent further damage by taking care not to make the window swing open or closed.

You can find the correct parts for your hinge by identifying the type of hinge it is. Maco, Mila and Roto are all manufacturers of window hinges. It is recommended to speak with an expert in this situation to ensure that you don't make the mistake of buying parts that are not compatible with your current hardware and cause further damage.

Faulty hinges are a major issue for uPVC windows and doors. They can be an important source of noise, and can also allow water to get into your windows.

To fix this issue, first verify whether the pin barrel on both sides of the hinge is aligned. If it's not tapping the headpin, use a hammer in order to make an incline in the hinge barrel. This will help to keep the pin in place. Then, ask a helper to hold the door as you take the hinge screws and hinges from both the doorjamb and the door. Replace the hinges with ones of a matching size and then attach the screws using glue. When the glue is drying, fix the hinges by using clamps or weights.

Once the hinges have been fixed after which you will be able to re-install the door and attach the handle. It is recommended to replace the screws with the same length of dowels as the original screw so that they align with each one.

Broken or Faulty Glass

uPVC Windows can become damaged over time, even though they are excellent at keeping out the cold and keeping the heat. This can include broken or damaged glass and faulty locks. This is a problem that could be extremely costly when neglected. It can also hurt your home's aesthetics and lead to a loss in insulation. It is crucial to repair to double glazed windows any damage promptly.

If your glass has broken but isn't shattered it is usually possible to repair it yourself with the proper tools and methods. Make sure the area around the broken glass is free of debris, so that fragments don't cause injury or trip hazards. After that, take away all broken glass pieces and dispose of them in the appropriate manner. Then, put masking tape over the entire area to stop fragments from bouncing around and sticking to your skin when you move them. Pre-fitting the glass pane prior to gluing it in place is an ideal option in the case of a window that has two panes. This will ensure that you have enough space to finish your project.

Before applying the glue, wipe the surface of the broken frame and glass with a an unclean, dry cloth. Follow the curing and application directions, which may vary from product to product. Depending on the degree of the crack you may need to secure the glass to hold it in place during the curing process with lightweight clamps specifically designed to support fragile materials.

Once the adhesive has fully set, carefully place the glass into the window frame. Make sure that it is flush with the frame edge and that there aren't gaps between the glass sash and frame. Avoid flexing the glass as you reinstall it in order to weaken the seal. This could lead to water infiltration or condensation.

If you have a glass window that's completely shattered or has larger cracks, consult a professional glazier such as O'Brien(r) to organise an exchange. Leaving broken glass unattended can cause danger to pets and children, so it's essential to act swiftly.