Repairs to uPVC Windows

uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they don't corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, which can make it very dangerous and potentially fatal. It is essential to make sure that your windows are in good condition.

Single-pane windows are relatively easy to replace and generally fit into frames of the past easily. If you have double glazing repairs-paned windows that are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you're planning attempt to remove the glass panes yourself it is important to wear appropriate safety gear, including thick gloves and eye protection. It is also a good idea to lay down a drop cloth prior to when you start working on the glass to ensure that any shards fall onto the fabric instead of onto the floor where they can be trampled on and cause further damage.

It's a great idea to cover the gap with tape after the glass is removed. This will stop drafts and water from entering your home until a professional arrives to repair the window. It also acts as a barrier, preventing any intruders from getting access into your home. If the gap between the window and the door is substantial, you may need to consider security screens that has an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. However, over time they can suffer from a variety of issues, including sagging. A window that is sagging can cause problems with light, draughts and even security. It's important to take action when you discover that your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window which is sagging. You'll first need to open the windows to access the frame. After that, using an screwdriver, remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you've moved your hinges. If you're satisfied with the fit of the window, tighten the screws to keep them in the right position.

If you can't reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to loosen. It is crucial to replace your seal as soon as you can in order to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also loosen. This is usually due to screws that have been removed over time, but it can also be due to the mechanism of the handle wearing out. It's fairly simple to fix a loose uPVC hand. First, you'll need to close the window and do an initial fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn't you can use a screwdriver to loosen up the handle. Then turn the mechanism back into place.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it is important that you take action. Windows that leak water do are not just a cause for degrading of the structure of your home but also hinder your efforts to regulate the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be done by any DIYer who is competent. Depending on the severity of the problem the old caulking may require removal before a new layer of caulk can be applied. It is crucial to keep in mind that when it comes to uPVC window repairs, do not be tempted to 'over-caulk in order to make the area more difficult to clean and can decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious instances, you might have to consider replacing the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and can quickly spread across the house.

It is also important to keep in mind that if the leakage originates from the glass of your double glaze repair near me-glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and blow open with ease, it may be the hinges that are at the fault. They can be easily replaced by any competent DIYer and can be done within a few minutes.

Most households in the UK will have either top hung or side hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. The process of replacing a hinge on a window repairman near me is essentially a very simple process but it can be simpler if you have someone to help hold the frame up.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The issue can be caused due to opening the window in the wrong way or due to a poor installation in the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be more than happy to give you advice.

It is also crucial to lubricate the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is a great method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. The ideal time to do this at least once a year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. First, the hinges because of wear and tear, can become misaligned, this will cause a gap to form where the sash meets the frame. If they're beyond double glaze repair, it may be necessary to have them realigned. Secondly the interlock, this is located on the hinge side of the window, can also become misaligned, again it may be feasible to give them a good clean, but in some instances it could be necessary to get them replaced.

The second most frequent cause of draughts is the window seals, these can become worn down or damaged over time and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and will reduce the risk of draughts.

Another, and most effective methods to reduce drafts is to use an draught excluder. These are typically fabric tubes which are filled with a type of filler. They can be put on the windowsill on top. They will help stop cold air from entering and keep your home warm and cozy!

With a little regular maintenance and repairs your windows made of upvc will provide excellent insulation and security for your home. However, it is important to realize that all windows have a lifespan and there may come a point where it is more efficient to replace them than repair them. If you encounter any issues with your window made of upvc it is recommended to speak with a professional immediately.