UPVC Window Handle Replacement

Replacing a damaged window handle is a relatively easy task and, with the right tools, it can be accomplished quite quickly. It's important to know the type of handle you have as well as the size of its spindle before purchasing an alternative.

Older uPVC window handles have a spur which extends and is locked over a wedge striker for cockspur. These can be left- or right-handed, and must be compatible when replaced.

What kind of lock or handle do I have?

There are many window locks and handles made from upvc, each with its own advantages and purposes. The type of handle you own will determine whether or not your locking mechanism is effective and also if it is simple to open the windows. Over time, and with regular use, the upvc handles on your windows can get worn out and damaged. This makes them less secure and less effective. In some cases they might even be completely removed. If you find that your window handles have been removed, it's crucial to fix them as soon as you can. This will help to prevent potential break-ins and ensure your home is secure.

It is a good thing that replacing your window handles made of upvc is a simple task that is achievable by almost anyone. With a few basic tools and the right information, this is a simple process that shouldn't take more than a couple minutes. To begin you'll need to identify the type of lock and handle you have on your upvc window, which will help you identify the best windowpane Replacement.

Inline Espagnolette Handles

These are the most common type of upvc handle and are usually placed on the outside of your window replacements. They are flat and come with an opening that engages the locking mechanism of the window frame. Inline upvc handles have a spindle that runs through the middle of the handle and into the window frame to operate the latch.

Cockspur Handles

These handles are usually found on older uPVC window frames and feature distinct hook-shaped designs. Cockspur handles are attached to the frame of the window with only one screw and are less secure than other kinds of window handle.

Handles that turn and tilt

The tilt and turn handles are different from other handles made of upvc in that they can be turned to open the window and then lowered into the window to ventilate. They have a 7mm spindle at the back and are available in right and left-handed versions.

When purchasing glass replacement in windows handles made of upvc, it is important to measure the spindle's length as not all are the same size. Drop something into the middle of the hole to test the length. This is the longest spindle length that will fit your window.

What is a spindle?

uPVC window handles operate in a similar way as doors. By turning the handle, you will be able to operate a latch within the frame. The latch opens the window, to allow it to be closed and opened. The handles could be damaged, especially if frequently used or exposed to harsh environments. This can leave you needing to replace your uPVC handles on windows since they may not operate the window in a proper manner anymore.

There are many types of uPVC handles, including Espag, Cockspur, and Spaded handles. These handles are designed in a variety of ways to fit into uPVC frames. Each handle type utilizes a different spindle to lock the window mechanism. It is important to identify the type of handle you have installed on your uPVC windows so that you can replace it with the right one.

You can check what type of uPVC handle you have by inspecting the base of the handle. There should be a "snap-in cover over one screw that holds the handle base in the correct position. Take it off and you should be able to see the second screw located at the opposite end of the base portion of the handle. Once both screws have been removed, you should be able take the handle out of the uPVC.

Once you have removed the uPVC window handle, you will need to remove the spindle you have removed from the locking mechanism. Note the length of the spindle. You'll need purchase a new one that is the same length as the original handle and locking device.

The spindle wears down and becomes inoperable with the locking mechanism. This could be due to corrosion, damage from constant use or the locking mechanism becoming looser. If this happens, you'll have to replace both the window handle and the locking mechanism in order to restore the full functionality of your uPVC Windows.

How do I get rid of my old handle?

Window handles can be damaged or even broken over the course of time. It is crucial to fix them as quickly as possible to ensure your security. Fortunately, replacing a damaged or worn handle is a fairly simple task that can be carried out in just over one minute and doesn't require any specialist tools.

To take off the handle, you first need to remove the screw that is located at the bottom of the handle. Once the screw is removed, the handle will be removed. There will be a second screw that is located at the bottom of the handle's base and it is able to be removed too. After the two screws are removed, the handle will be removed from the window's base.

After removing the handle, align the fixing holes of the new handle to the existing holes in the window frame. There may be a little sticker or caps on the new handle, so take off these if necessary and then put the handle in place. Once the handle is in place it is crucial to verify that it works by turning the handle, and ensuring that the lock mechanism activates.

Espag handles have an elongated spindle that extends from the handle and slot into a multipoint locking mechanism in the window frame. Cadenza windows have a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and hang over the outer frame of the window or the transom crossmember of the bar.

Once you have the new handle in place, insert the spindle into the lock in the window and then tighten it. When the handle is fixed, replace the'snap in' cover and screw cap (if necessary). When the handle is ready to use, open and close the window a couple of times to ensure it works properly and securely.

How do I install the new handle?

The process of changing your window handle made of uPVC isn't difficult and the process is actually very simple. All you need is a screwdriver and little bit of patience. First, ensure that the old handle is unlocked. Remove any screws visible. You can also replace them with screw caps. After the handle has been removed it is necessary to take a note of the length of the spindle that protrudes from the back of the handle. This is vital because it will determine the kind of handle to purchase.

Espagnolette handles are the most popular kind of handle that is used on uPVC windows. They have a spindle that runs through the handle and acts as a locking mechanism within the window frame. The handle releases the latch and allows the window to open. In regular use and over time, handles for espagnolette may be damaged.

Cadenza handles are a form of uPVC handle that is typically used in tilt and turn windows. They have a protruding blade that operates an interlocking mechanism that is multipoint within the window. They are usually more secure than espagnolette handles as they can only be opened from the inside. They can be replaced using the same method that you would for espagnolette handles however, make sure that the new handle is not angled and flat.

After you have picked the correct handle, simply align the new handle to existing screw holes before fixing it with screws. Then, put the screw covers back on and verify that the new handle is working correctly. This is done by moving the handle from the locked to the unlocked position and then back to the locked position several times. It is possible to contact an expert to see how you can fix any issues. They can often advise you on the best approach to resolve the issue in a quick and effective manner.