Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. They don't decay or rust as aluminum or timber.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will reduce unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home, and could even be fatal. It is crucial to take the time to ensure that you're doing everything you can to ensure that your windows are in good repair.

For single pane windows, it is relatively easy to replace them, and the replacement will usually fit inside the frame of the previous one easily. However If you have double pane windows that are held in place by internal beading it will be more difficult to remove the panes that are in place and replace them with new ones. In this instance, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass yourself. It is also a good idea to lay down a drop cloth before you begin working on the glass so that any fragments of glass fall onto the cloth instead of landing on the floor, where they could be trodden under and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to stop drafts and water from entering the property until a professional can come out and repair the window. This also serves as a barrier to prevent any criminals from getting into your home. If the gap between the window and the door is significant, you may want to use a security screen that also includes an opening. This will give you the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber sash windows. However, with time, they are susceptible to a range of issues, including sagging. A window that is sagging can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from becoming worse.

Repositioning the hinges can help fix a window that is sagging. First, you'll need to unblock the windows so you can reach the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you have repositioned your hinges. If you're satisfied with the fit of the window, you can tighten screws to keep them in the right position.

If you are unable to move the hinges, you may have to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loosen. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows are watertight and safe from drafts.

uPVC handles can also become loose. This is usually due to screws that have loosened over time, but it can also be caused by the handle mechanism wears out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. First, you'll need to shut the window and then perform an experiment fitting. The corner joints of the sash need to align with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and reverse the mechanism back into position.

3. Water Leaks

It is essential to take action if get up each morning to find mouldy walls and floors that are wet. Water leaks from windows not only lead to the degrading of the structure of your home but also hinder your efforts to regulate the temperature in your home. Most of the time, upvc window repairs near me window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be done by any skilled DIYer. Depending on the severity of the problem is, the old caulking might need to be removed. It is crucial to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious instances, you may need to think about replacing the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely the issue is more with the seal than the frame. It is also possible to be repaired by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or if it opens in the breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Like any mechanical component hinges will be damaged over time. It's easy to change a window hinge, but it's easier if someone helps hold the frame.

Make sure that the uPVC hinges open and close in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window a certain manner or because of inadequate installation at the factory. Sending us a photo via our website will often solve the issue. We are always happy to provide advice.

It is also essential to lubricate the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window to open and close more easily. It can also reduce the possibility of a window getting stuck and stop corrosion. This should be done at least once a year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in upvc window repair windows can be caused by different things. The hinges, also due to wear and tear could become misaligned. This can cause an opening to appear between the sash and the frame. They can be repaired by giving them a thorough clean, however in the event that they are beyond repair it may be necessary to have them re-aligned or replaced. Second, the interlock can be misaligned. It is located on the hinge's side and may need to be cleaned. In certain instances, it may be necessary to replace the hinges.

The next common cause of draughts is the window seals. They are susceptible to being worn out or damaged over time and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and will reduce the risk of draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be placed over your window sill. They can help keep cold air out and keep your home warm and cosy!

Your windows made of upvc will keep providing excellent insulation and security to your home by performing regular maintenance and repairs. It is crucial to recognise that all windows have a life span and they may reach the point when it's more efficient to replace them than repair them. If you encounter any issues with your upvc window you should consult a professional as soon as possible.