Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to rot or rust like aluminum and timber.

It is important to clean and oil UPVC windows and doors regularly. This will help prevent costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home, and could even be fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace them, and UPVC repair the new window will generally fit within the old frame very easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the old panes. In this instance it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you plan attempt to remove the window panes yourself it is important to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric, not onto the floor, where they could be trampled under.

It's a great idea to tape the gap once the glass has been removed. This will keep drafts and water from getting into your home until a professional is able to repair the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the gap between the door and the window is substantial, you may need to consider security screens that includes an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows with sash. However, over time they may be afflicted by a variety of issues like sagging. A window that is sagging can cause problems with light, draughts or even security. It's crucial to act when you discover that your uPVC windows are sliding.

To repair a window that is sagging, you can try repositioning the hinges. To accomplish this, you'll have to open the window so that you can get to the frame. Then, using an screwdriver, remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you have repositioned your hinges. If you are happy with the fit of the window, you can tighten screws to keep them in place.

If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to loose their elasticity. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows remain watertight and safe from drafts.

UPVC handles can also loosen up. Most often this is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. You'll first need to close the window and then perform an initial fitting. The corner joints of the sash need to align with the casing joint. If it isn't then you can use a screwdriver or a wrench to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

It is important to act if you get up each morning to find a smoky wall and wet floors. The leaks of water through windows could cause structural damage to your home and impact your ability to regulate the temperature of your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is damaged or is missing.

This is a simple fix that can be accomplished by any DIYer who is competent. Based on the severity of the issue the caulking that was used up may need to be removed before a new layer can be put on. When it is time to uPVC repair, you must avoid 'over-caulking'. This can make your window harder to clean and reduce its energy efficiency.

It is essential to ensure that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious cases you might have to consider replacing the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and can quickly spread across the home.

If the leakage occurs between the double glazing repair-glazed glass, it is more likely that the issue is with the seal than the frame. It is also possible to be corrected by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open, or if it opens with an ease. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like any mechanical part hinges will wear out over time. It is very easy to change a window hinge, but it's easier if someone helps you hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a particular way or due to improper installation in the factory. This issue can be fixed by sending us a photo on our website. We will be happy to give you suggestions.

It is also crucial to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant on the hinges is a good method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It can also lower the possibility of a window getting stuck and stop corrosion. This must be done at a minimum once a year. WD40 or other solvent-based lubricants should not be used as they could damage your upvc repair windows.

5. Draughts

Draughts can be caused by several different causes. The hinges, also because of wear and tear, could become misaligned. This causes a gap to form where the sash joins the frame. These can be easily fixed by giving them a good clean, but when they're beyond repair, it may be necessary to get them realigned or replaced. The interlock may be unbalanced. This is located on the hinge's side and could require to be cleaned. In some cases it is possible to replace the hinges.

The next most common reason for draughts are the window seals, these are susceptible to being worn out or damaged over time, and let air escape through these gaps. Replacing these with high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen the possibility of draughts.

The final method to cut down on draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be put on top of your window sill. These will help to stop cold air from entering and keep your home warm and cosy!

With a little regular maintenance and repairs your windows made of upvc will continue to provide an excellent level of insulation and security for your home. However, it is important to recognise that all windows have a lifespan and Upvc repair eventually, they will reach a point where it is more efficient to replace them than fix them. So, if you're having issues with your upvc windows, it is always best to seek professional assistance immediately.